With this in mind, GE designed their Z-wave switches to be dead easy to use. Everything from resetting to adding the device to a new Z-wave network is dead simple. How to Reset Factory Settings
Tap the ON button rapidly three timesImmediately after, tap the OFF button three timesThe LED on your switch should flash five times after a successful factory reset.
How to Add Your Device to a Z-Wave Network
When you reset the switch, you have to add it back to your Z-wave network by pairing it with the Z-wave hub again.
Put the Z-wave in pairing mode.Ensure the switch is installed and poweredPress and release the top or the bottom button on the smart switch, and it will pair with the network.
Removing the button from the network is the same. You have to put the z-wave hub in the ready-to-remove switch mode before pressing and releasing the bottom or top button on the switch.
